Table of Contents
Advertisement
Removing a Preset
1
From an applicable media screen, select Presets.
2
Select a preset from the list.
3
Select Remove Current Channel.
Setting the Device Name
1
From the media screen, select Menu > Installation > Set
Device Name.
2
Enter a device name.
3
Select Done.
Updating the Media Player Software
You can update the software on compatible connected stereos
and accessories.
1
Go to www.fusionentertainment.com/marine, and download
the software update onto a USB flash drive.
Software updates and instructions are available on your
device product page.
2
Insert the USB flash drive into the USB port of the stereo.
3
On the RV Fixed Display device media screen, select Menu
> Installation > Update Software.
4
Select the item to update.
Device Configuration
System Settings
Select Settings > System.
Sounds and Display: Adjusts the display and audio settings.
System Information: Provides information about the devices on
the network and the software version.
Auto Power Up: Controls which networked devices turn on
automatically when you turn on the system.
Auto Power Off: Automatically turns off the system after it has
been asleep for the selected length of time.
Sounds and Display Settings
Select Settings > System > Sounds and Display.
Beeper: Turns on and off the tone that sounds for alarms and
selections.
Backlight: Sets the backlight brightness. You can select the
Auto option to adjust the backlight brightness automatically
based on the ambient light.
Backlight Sync: Synchronizes the backlight brightness of other
chartplotters in the station.
Color Mode: Sets the device to display day or night colors. You
can select the Auto option to allow the device to set day or
night colors automatically based on the time of day.
Background: Sets the background image.
Startup Image: Sets the image that appears when you turn on
the device.
Viewing System Software Information
Select Settings > System > System Information >
Software Information.
Preferences Settings
Select Settings > Preferences.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Keyboard Layout: Sets the arrangement of the keys on the on-
screen keyboard.
Device Configuration
Screenshot Capture: Allows the device to save images of the
screen.
Menu Bar Display: Sets the menu bar to always show or
automatically hide when it is not needed.
Restoring the Original Device Factory
Settings
NOTE: This affects all devices on the network.
1
Select Settings > System > System Information > Reset.
2
Select an option:
• To reset the device settings to the factory default values,
select Reset Default Settings. This restores the default
configuration settings, but does not remove saved user
data or software updates.
• To clear saved data, select Delete User Data. This does
not affect software updates.
• To clear saved data and reset device settings to the
factory default values, disconnect the device from the
Garmin Marine Network, and select Delete Data and
Reset Settings. This does not affect software updates.
Appendix
Software Update
You may need to update the device software when you install
the device or add an accessory to the device.
Loading the New Software on a Memory Card
1
Insert a memory card into the card slot on the computer.
2
Go to www.garmin.com, and locate the product page.
3
Select Software from the product page.
4
Select Download.
5
Read and agree to the terms.
6
Select Download.
7
Select Run.
8
Select the drive associated with the memory card, and select
Next > Finish.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card.
1
Turn on the device, and wait for the home screen to appear.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
2
Open the memory card door
3
Insert the memory card
4
Close the door.
5
Follow the on-screen instructions.
.
, and press it in until it clicks.
3
Advertisement
Table of Contents
