Re-Connecting Cables; Led Cables - Asus Terminator C3 User Manual

2.9

Re-connecting cables

You may have disconnected some cables when you were installing
components. You must re-connect these cables before you replace the
chassis cover.
2.9.1 2.9.1

LED cables

LED cables
2.9.1 2.9.1 2.9.1 LED cables LED cables LED cables
P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h P o w e r s w i t c h
P o w e r L E D P o w e r L E D P o w e r L E D P o w e r L E D P o w e r L E D
H D D L E D H D D L E D H D D L E D H D D L E D H D D L E D
power switch power switch
• Connect the power switch power switch and power LED power switch
leads in the PANEL connector on the motherboard.
H D D L E D H D D L E D
• Connect the H D D L E D H D D L E D cable to the 2-pin lead marked IDELED. H D D L E D
A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m
A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m A S U S T e r m i n a t o r 1 C 3 b a r e b o n e s y s t e m
P A N E L P A N E L P A N E L
P A N E L P A N E L
power LED power LED
power LED cables to their respective power LED
SPEAKER
PLED
RESET
IDELED
PWRBTN
SMI
Requires an ATX power supply.
*
2 - 1 5 2 - 1 5
2 - 1 5 2 - 1 5 2 - 1 5