Recovering Your System; Using The Hidden Partition - Asus Eee Top ET1611 User Manual

Recovering your system

Using the hidden partition

The recovery partition includes an image of the operating system, drivers, and utilities installed
on your system at the factory. The recovery partition provides a comprehensive recovery
solution that quickly restores your system's software to its original working state, provided that
your hard disk drive is in good working order. Before using the recovery partition, copy your
data files (such as Outlook PST files) to a USB device or to a network drive and make note of
any customized configuration settings (such as network settings).
1. Start the system and press <F2> on bootup to show the POST screen. Press <F2> again to
enter the BIOS setup.
Set Boot Booster to [Disabled].
2.
If you fail to see the POST screen or enter the BIOS setup by doing the instruction above, restart
the system and try pressing <F2> repeatedly on bootup.
Main Advanced
Boot Booster
Boot Settings
Boot Device Priority
Boot Settings Configuration
Boot Settings Configuration
Security
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3. Press <F10> to save the configuration and restart ASUS All-in-one PC.
Main Advanced
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults
Save configuration changes and exit now?
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Power Boot Tools Exit
[Disabled]
Options
Disabled
Enabled
BIOS SETUP UTILITY
Power Boot Tools Exit
[Ok] [Cancel]
Enabled: Boost
BIOS POST speed.
←→ Select Screen
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
ASUS All-in-one PC ET1611 Series 35