Close The Door And Press The Button; Once The Program Has Finished - Asko W6903SS Operating Instructions Manual

Asko w6903ss: user guide
Table of Contents

Advertisement

Operating instructions
6
Close the door and press the
Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a program has been selected,
an estimated running time for the complete
program is displayed. This may differ from
time to time depending on the temperature of
the water entering the machine and the size
of the load. During the actual program the
time counts down in minutes. If the program
time is longer than a previous wash with the
same program, "1" will be displayed until the
program has finished.
To add or remove laundry after the
program starts
If you want to add or remove items after the
program has started, you can stop the pro-
gram by pressing and holding the Door
Opening button (key symbol) for three sec-
onds. "Door" appears on the display. When
you restart the machine, add any extra deter-
gent needed and close the door. The machine
continues automatically from the point where
the program was interrupted.
Stopping or changing a program
You can also stop a program by pressing the
Start/Stop button for three seconds. "Stop"
appears on the display. To restart the ma-
chine, select a new program, add any extra
detergent needed, and press the Start/Stop
button.
7

Once the program has finished

Once a program has finished, "End"
appears on the display.
The door opens automatically once the pro-
gram has finished. If you want to deactivate
Automatic Door Opening, see the "Selecting
settings" section.
• Remove the laundry.
• Turn off the main power switch, turn
off the main power switch...and you
will save energy.
If you have small children or pets at home,
close the washer door once you have re-
moved the laundry.
Customer Care Center
1-800-898-1879
www.askousa.com
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

W6903

Table of Contents