Trouble Shooting - Asko T741 User Manual

11 TROUBLE SHOOTING

THE MACHINE WILL NOT START
Check that:
• The door is properly closed.
• The main switch is pressed in.
• You have correctly set the required program
or the required time in the timed program.
• the Delayed start option is not switched on.
In this case, the time remaining to start in hours
will be indicated in the display (e.g.
interrupt the program, see Chapter 8 – Tumble
dry.
• The electric plug, if any, is firmly inserted in
its socket.
• All fuses are intact. Switch two fuses over. It is
not always possible to see directly if a fuse has
blown.
• The overheating device has not triggered, see
below.
OVERHEATING PROTECTION
The overheating protection device switches off
the tumble dryer if the tem-
perature becomes too high,
eg, because the fluff filter
is clogged. If this happens,
clean the filter, empty the
water container and clean
the condenser. Then reset
the overheating device by pressing
the black rubber button on the back of the
machine.
20
EXCESSIVE DRYING TIME
Empty the water container and check that the
lint filter and the condenser are not clogged,
see Chapter 10, Care and Cleaning. Excessive
drying times can also be caused by the machine
being installed in a very confined space and by
the air in the room (which cools the machine)
becoming too warm. In this situation make sure
). To that ventilation is improved, eg, by opening
doors and/or windows.
If this does not help, check the fuses.