Asko T741 User Manual page 14

in steps of 5 minutes, within four minutes after
the start of the start of the drying program).
indicates 2 hours and 35 minutes, for
example. Only the time for the Time program
and Air fluff drying is indicated for venting dry-
ers.
During cooling,
together with the number of minutes remain-
ing.
If the Anti-crease option is selected, the drum
will rotate every minute for a certain period
after cooling. The text
display during this period. The program will
stop as soon as the door is opened.
DURING THE PROGRAM
If you wish to interrupt or change the program
Hold down the
conds. An extinguished LED next to the button
indicates that the program has been interrup-
ted.
Changing the program selector knob after
starting will not affect the program.
Putting in or taking out washing
If you wish to put in or take out washing after
you have started the machine, opening the door
will cause the machine to stop automatically.
Put in more washing, close the door and press
the button. The program will restart au-
tomatically from the point at which it was in-
terrupted.
14
is indicated in the display
is indicated in the
button for three se-
8 8
DRYING PROGRAM ENDED
The text
that the program has ended.
If the Anti-crease option is selected, the drum
will rotate every minute for a certain period
after cooling. The text
display during this period. The program will
stop as soon as the door is opened.
NOTE
- Clean the lint filter after each tumble drying
operation.
- Drain the condensation water container.
WARNING
Regularly clean the lint filter. If the lint filter
becomes completely clogged, this may cause the
overheating protection to trip. The filter must
then be cleaned and the overheating protection
must be reset before restarting the machine; see
Chapter 11, Trouble shooting.
Cleaning the lint filter
1. Grasp the filter handle and pull
it towards you.
2. Pull the filter up out of the
holder.
3. Open the filter and
brush away any lint
with your hand.
4. Fold the filter to-
gether and replace it in
the filter holder.
NOTE
Regularly clean the lintfilter.
in the display indicates
is indicated in the