Connection To Water; Connection To Electricity; Connection To Drainage - Asko D3132 Use And Care Manual

Asko d3132: user guide
Hide thumbs Also See for D3132:
Table of Contents

Advertisement

Connection to water

There must be a shut-off tap on the water
supply pipe. The shut-off tap should be
easily accessible.
The water supply pipe has a connection
with a 1/2" or 3/4" internal thread depending
on country.
When the installation is complete, the shut-
off tap should be opened to allow the pres-
sure to settle for a while and to check that
all connections are tight.
NB!
It is recommended that connection should
be to cold water.

Connection to electricity

A dishwasher fitted with a lead and plug
must be connected to an earthed socket.
Repairs and maintenance relating to safety
or performance must be carried out by a
qualified professional.
Technical data
See the type plate on the right side wall.
NB!
The hose must be fastened level with the
underside of the sink unit.
It must be discharged at least 350 mm
above the bottom of the machine.
Illustration 1
Max 950 mm
Min 350 mm
30
CAUTION!
The lead must be removed from the socket
while the work is carried out!

Connection to drainage

When the drain hose is routed to a
connection nipple at the sink's water trap
(see illustration 1), note that the hose must
be fastened level with the underside of the
sink unit – otherwise the dishwater from the
sink can run down into the dishwasher. The
drain hose is threaded onto a cone-shaped
connecting pipe at the sink unit's water trap.
The cone-shaped pipe must be cut to an
internal diameter of at least 16 mm. For
other alternative connections, see
illustrations 2 and 3.
The drain hose may be lengthened by a
maximum of 3 m (the total length of the
drain hose may not exceed 4.5 m). Any
connections and connecting pipes must
have an internal diameter of at least 16 mm.
However, the drain hose should ideally be
replaced with a new hose without joins.
Attach the drain hose with a securing clamp.
No part of the drain hose may be more than
950 mm above the bottom of the machine.
The hose must not be routed directly to the
floor drain or similar. In such cases, the
hose can act as a siphon and empty the
dishwasher.
Illustration 2
Max 950 mm
Min 350 mm
Illustration 3
Max 950 mm
Min 350 mm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents