Product Warranty - Johnson Controls IOM3731 Installation Manual

Table 9: IOM3731 technical specifications
Dimensions(Height x Width x Depth)
Weight
Compliance
The performance specifications are nominal and conform to
acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson
Controls office. Johnson Controls shall not be liable for
®
damages resulting from misapplication or misuse of its
products.

Product warranty

This product is covered by a limited warranty, details
of which can be found at www.johnsoncontrols.com/
buildingswarranty.
Single point of contact
APAC
JOHNSON CONTROLS
C/O CONTROLS PRODUCT
MANAGEMENT
NO. 32 CHANGJIJANG RD NEW
DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
For more contact information, refer to
www.johnsoncontrols.com/locations.
© 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision and
are subject to change without notice.
150 mm x 164 mm x 53 mm (5-7/8 in. x 6-1/2 in. x 2-1/8 in.) including terminals and
mounting clips
Note: Mounting space requires an additional 50 mm (2 in.) space on top,
bottom and front face of controller for easy cover removal, ventilation and wire
terminations.
0.5 kg (1.1 lb)
United States: UL Listed, File E107041, CCN PAZX, UL 916, Energy Management
Equipment
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada: UL Listed, File E107041, CCN PAZX7 CAN/CSA C22.2 No.205, Signal Equipment
Industry Canada Compliant, ICES-003
Europe: Johnson Controls declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive.
Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant
BACnet International: BACnet Testing Laboratories (BTL) Protocol Revision 4 Listed
BACnet Application Specific Controller (B-ASC)
Europe NA/SA
JOHNSON CONTROLS JOHNSON CONTROLS
WESTENDHOF 3 507 E MICHIGAN ST
45143 ESSEN MILWAUKEE WI 53202
GERMANY USA
www.johnsoncontrols.com