Delay Parameters - Art Quadra/FX User Manual

Dynamic
The Dynamic Delay uses input level to switch the Regen amount between its preset value and 0.
Delay
DELAY
(Delay Time
± 1 ms)
Vocal 0–1250ms
Instrument 0–1250ms
Concert 0–1250ms
Gated 0–1250ms
Ambient In feet, based
on Size
Dynamic 0–1250ms

DELAY PARAMETERS:

Delay: Changes the delay time in
except Stereo, which has up to 2.75 seconds of delay. In the Ambient class, this parameter sets the
distance of the microphones to the simulated speaker cabinet. This control is set in feet and its range is
based on the Size setting.
Size: Changes the delay time in
simulated speaker cabinet, from 2 to 112 feet in Stereo routing and 2 to 52 feet in all other routings.
Regen: Sets the amount of delay feedback, from
feedback.
Decay: In the Vocal class, this control sets the fade time of the effect after it
has been dynamically triggered. In the Dynamic class, Decay sets the
time that it takes the Regen parameter to switch between the preset
amount and a value of 0, depending on audio level. A graph of this
control's action is on page 66.
Shape: This parameter sets the spacing, or shape, of the delay taps. (See the
Shape Control table.) Discrete 4 (mono) routing uses the first 9 shapes
only.
In the Ambient class, this parameter sets
the horizontal and vertical positioning of
the "microphones" in front of the simulated
speaker cabinet. See the Ambient Delay
Shape Control diagram. With values
between 0 and 8, both mics follow the shape of the graph. With values
between 9 and 17, both mics follow the same shape, but each one is isolated from the opposite speaker. In
Size Regen
(Delay Time (Regen)
± 50 ms)
0–1250ms -99 – +100
0–1250ms -99 – +100
0–1250ms -99 – +100
0–1250ms -99 – +100
2–112 ft.
(in Stereo)
0–1250ms -99– +100
±
1 millisecond steps. The total amount of delay is 1.25 seconds in all routings
±
50 millisecond steps. In the Ambient class, this parameter sets the size of the
Decay Shape Pitch
(Fade (Shape)
Time) (1–9 in Discrete 4)
0–100 1–18
1–18
1–18
1–18
1–18
0-100 1–18
Negative numbers correspond to inverted
-99% to +100%.
- 37 -
Speed Width Special
(Number (*see
of Taps) below)
1–12 Threshold
1–12
1–12
1–12 Threshold
0–2.2 ft.
1–12 Threshold
Shape Control:
Level Spacing
1 flat linear
2 flat increasing
3 flat decreasing
4 forward linear
5 forward increasing
6 forward decreasing
7 reverse linear
8 reverse increasing
9 reverse decreasing
–Stereo Ping-Pong Shapes–
10 flat linear
11 flat increasing
12 flat decreasing
13 forward linear
14 forward increasing
15 forward decreasing
16 reverse linear
17 reverse increasing
18 reverse decreasing