Centre High-Mounted Brake Light - Opel Vivaro Owner's Manual

2. Pull the retaining lug upwards and
remove the bulb socket from the
plug connector.
3. Replace the complete unit.
4. Insert left end of the lamp, slide to
the left and insert right end.
Centre high-mounted brake
light
Vehicles with hinged doors or
tailgate
1. Open the rear doors.
2. a) vehicles with tailgate:
Loose the inner trim from clips by
swiveling it upwards and
downwards. Pull trim off carefully.
b) vehicles with hinged doors:
Vehicle care
Wrap a cloth around the tip of a
slot screwdriver to prevent paint
damage. Remove the inner cover
or air vent with the screwdriver.
3. Push the brake light assembly
carefully out through the recess.
4. Detach the cable from the retainer
in the light assembly.
5. Remove the socket of the defect
bulb by turning it a quarter turn
anti-clockwise.
6. Renew bulb.
7. Install brake light assembly like
explained above, in reversed
order.
229