Connecting With Windows Dialup - Zte A002ZT User Manual

OK
Once "A002ZT Hostless Modem" no longer appears in start
menu, driver is uninstalled.

Connecting with Windows Dialup

To set up a new dialup connection, phone number and
account information for the connection are necessary.
Use "*99#" or "*99***1#" as the phone number, and you
should check account information from SoftBank Website
(https://www.softbank.jp/biz/mobile/lineup/data/a002zt/
support/), the Internet service provider (ISP), or the network
administrator.
Screenshots and steps described here are for Windows 10.
Depending on your operating system or environment, shown
screens and messages may differ.
Set USB modem in "MODEM MODE" to make a dialup
connection. Change the mode using "Modem Switch Tool."
Download from the URL below.
https://www.ztedevices.com/jp/?soft=a002zt-tool-download
Connecting with Windows Dialup
Turn on PC first.
Click start menu Windows System
Network and Internet Network and Sharing Center
Set up a new connection or network
Select connection option Connect to the Internet
・If confirmation window appears for using existing
connection, select "Set up a new connection anyway."
Dial-up
・If modem or TA other than USB modem is installed, screen
for device selection appears. Select USB modem ("Modem -
ZTE Proprietary USB Modem #2").
Enter phone number and account information you checked,
Create
13
Control Panel
Next