Table of Contents
Advertisement
120
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The guidelines are based on standards that were developed
by independent scientific organization through periodic and
thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/kg. The tests are
performed in positions and locations (e.g. worn on the body)
as required by the FCC for each model.
The highest SAR value for this model handset as reported to
the FCC when tested for use worn on the body in a holder or
carry case, is 1.358 W/kg.
Body-worn Operation; This device was tested for typical
body-worn operations with the back of the handset kept
0.5 cm from the body. To maintain compliance with FCC RF
exposure requirements, use accessories that maintain a 0.5
cm separation distance between the user's body and the back
of the handset. The use of beltclips, holsters and similar
accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. The FCC has granted an Equipment
Authorization for this model handset with all reported SAR
levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model handset is on
file with the FCC and can be found under the Display Grant
section of
http://www.fcc.gov/oet/ea/
ID SRQ-MF993.
Additional information on Specific Absorption Rates (SAR) can
be found on FCC Radio Frequency Safety website at
www.fcc.gov/general/radio-frequency-safety-0.
after searching on FCC
https://
EU DECLARATION OF CONFORMITY
It is hereby declared that following designated product:
Product Type: USB Modem
Model No: A002ZT, MF863
Product Description: USB Modem
Software version: BD_A002ZTV0.0.0B03
Hardware version: md8B
Complies with the essential protection requirements
of Directives on Radio Equipment Directive 2014/53/
EU,Restriction of the Certain Hazardous Substances in
electrical and electronic equipment (Directive 2011/65/
EU), Eco-design Requirements for Energy-Related Products
(Directive 2009/125/EC) and their amendments.
The assessments were based on the following regulations and
standards:
Requirement
No. / Assessment Body
・Standard
EN 50566: 2017
EN 62209-2: 2010
EN 50663:2017
EN 62368-1:2014+A11:2017
・Report No.
Health and
SET2020-05232
safety
SET2020-05022
・Assessment Body
TIMCO Engineering, Inc.
(Notified body 1177)
EU-type examination
certificate:1177-200047
・Standard
ETSI EN 301 489-1 V2.2.3
Draft ETSI EN 301 489-52 V1.1.0
・Report No.
SET2020-05106
EMC
・Assessment Body
TIMCO Engineering, Inc.
(Notified body 1177)
EU-type examination
certificate:1177-200047
Standard / Report
Advertisement
Table of Contents
