Know Your System Control Board - Briggs & Stratton 01938-0 Installation And Start-Up Manual

10kw/12kw rated home generator
Hide thumbs Also See for 01938-0:
Table of Contents

Advertisement

Available languages

Available languages

KNOW YOUR SYSTEM CONTROL BOARD

Compare this Control Board illustration with your generator to familiarize yourself with the location of these important
controls and connections:
50/60 Hz Switch
12 Volt DC,
.5 Amp Output
12 Volt DC, .5 Amp Output — Internal power supply.
50/60 Hz Switch — Allows factory to select between
either 50 Hz or 60 Hz. Make sure the switch is in the
60 Hz position at all times for proper generator operation.
Emergency Failure — Use NO2, Common2 and NC2 to
hook up a siren, light, etc. to alert you in case of a failure
during a power outage.
Briggs & Stratton Power Products Home Generator
Emergency Failure
Exercise Failure
Installation Manual
Exercise Failure — Use NO1, Common1 and NC1 to
hook up a siren, light, etc. to alert you in case of a failure
during the exercise cycle.
Remote LED Output — Use this to hook up the extra
remote LED supplied with the generator.The remote LED
will turn on and off in a series of blinks if certain faults are
detected in the generator.
10
Remote LED Output

Advertisement

Table of Contents
loading

This manual is also suitable for:

1815-010kw12kw01815-0

Table of Contents