Technical Data - Siemens SICAM A8000 Series Manual

Standard I/O Modules
2.9.3

Technical Data

Inputs for measuring currents
Nominal voltage at I
Max. input voltage
Nominal frequency
Resolution
Scanning
Internal resistance
Inputs for measuring voltages
Nominal voltage at U
Max. measuring voltage
Nominal frequency
Resolution
Scanning
Internal resistance
Power supply
Operating voltage
Mechanics and connectors
Terminals
Rated impulse voltage
Connection data X1, X2
Dimensions
Weight
*)
the respective manufacturer is imprinted at the terminal (see section 1.2.4.1,
66
AC 225 mV acc. to IEC 60044-8
N
AC 2.25 V
50 Hz, 60 Hz (range 45...65 Hz)
16 bits
1 value/ms
22 kΩ
AC 3.25 V/√3 acc. to IEC 60044-7
N
150% U
N
50 Hz, 60 Hz (range 45...65 Hz)
16 bits
1 value/ms
200 kΩ
DC 4.75...5.5 V
The voltage is picked off at the system bus
Removable screw terminals (grid size 5.08)
• 3 LoPo measuring currents , 10-pin (X1)
• 3 LoPo measuring voltages , 9-pin (X2)
4 kV (X2) < 2000 m: measurement category III
Locking torque
AWG
Conductor cross section solid
Conductor cross section stranded
Conductor cross section stranded with
ferrule without plastic sleeve
Conductor cross section stranded with
ferrule with plastic sleeve
2 wires stranded with ferrule without
plastic sleeve
2 wires stranded with TWIN ferrule with
plastic sleeve
Wire strip length
Length ferrule
124 x 30 x 132 mm (L x W x H, dimensions w/o DIN rail)
Approx. 252 g (incl. bus module 12 g)
Unrestricted
max. 800 mW (typ. 625 mW)
< 3000 m: measurement category II
*)
(PHOENIX)
(FCI)
SICAM A8000 Series, SICAM I/O Modules
DC8-012-2.06, Edition 09.2019
0.5 Nm to 0.6 Nm
0.36 Nm to 0.44 Nm
min. 22
max. 12
min. 0.33 mm²
max. 2.5 mm²
min. 0.33 mm²
max. 2.5 mm²
min. 0.33 mm²
max. 2.5 mm²
min. 0.33 mm²
max. 2.5 mm²
min. 0.33 mm²
max. 1 mm²
min. 0.5 mm²
max. 1.31 mm²
min. 6 mm
max. 7 mm
10 mm
Screw Terminal Types)