Advertisement
3M Personal Safety Division
User Seal Check
1)
Cover the front of the respirator with both hands being careful not to disturb the fit of the respirator.
a)
UNVALVED respirator - EXHALE sharply;
b)
VALVED respirator - INHALE sharply;
2)
If air leaks around the nose, re-adjust the noseclip to eliminate leakage. Repeat the above user seal check.
3)
If air leaks at the respirator edges, work the straps back along the sides of the head to eliminate leakage. Repeat the
above user seal check.
If you CANNOT achieve a proper seal, DO NOT enter the hazardous area. See your supervisor.
Users should be fit tested in accordance with national requirements. For information regarding fit testing procedures, please
contact 3M.
Marking
NR = Non-reusable (single shift use only)
D = Meets the clogging requirements
End of Shelf Life. Date format: YYYY/MM/DD
Temperature Range
Disposal
Contaminated products should be disposed as hazardous waste in accordance with national regulations.
Maximum Relative Humidity
Name and address of Legal Manufacturer
Dispose of in accordance with local regulations
5
Advertisement
