Polaris ranger 1000 door kit. fits utv models: polaris ranger 900, xp 900, 1000 & xp 1000 (9 pages)
Summary of Contents for Curtis 47587418001
Page 1
Experienced Dealer Technician – 30 Minutes Average Dealer Technician – 45 Minutes Do-It-Yourself – 1 hour (*=Not including accessories) The contents of this envelope are the property of the owner. Leave with the owner when installation is complete. Rev. E, 11/20/2020 p/n: IM-47587418001...
For accurate installation, proper operation, and years of satisfaction, please read and understand the installation and owner’s manual fully prior to installing the beacon light. From all of us at Curtis, we thank you for choosing our product ADDED WEIGHT Curtis Cabs, blades and general accessories add additional weight to the base vehicle.
3 of 6 INSTALLATION CARRYALL 4x2: 1. Vehicle Preparation: 1.1 Remove the plastic roof from the metal roof pan by removing the 6 button head bolts, metal fender washers and rubber fender washers keep this hardware for reuse. See figure 1.1. Fig.
Page 4
4 of 6 INSTALLATION CARRYALL 4x4: 1. Beacon Light Installation: 1.1 Use the template included with the Beacon Light Holes to Drill to locate and drill 4 holes with the template centered side-to-side, front-to-back as listed below and oriented as shown. 1.1a 2-passenger: 21”...
5 of 6 SERVICE PARTS PART NUMBER. DESCRIPTION QTY. 9LEDS-A BEACON LIGHT LED (AMBER) HWK-00043 HARDWARE KIT, BEACON LIGHT * NS=Not Shown...
Page 6
6 of 6 BEACON LIGHT DRILL TEMPLATE A: Three 7/16” diameter beacon light mounting holes. Drill at all three marks labeled “A”. B: One 3/8” diameter hole for beacon light wire. Choose one best fit location for the wire and drill one hole there (at only one of the options marked “B”).