Position And Height Of The Presser Foot; Position Of The Thread Guide - JUKI MF-7000 Series Engineer's Manual

MF

13) Position and height of the presser foot

1 Adjust the position of the presser foot so that the needles enter the center of the needle entry holes
in the presser foot on condition that the presser foot is set correct to the presser bar.
2 Adjust the height of the presser foot so that when the needle bar is in its highest point, the needle
point does not come out from the lower face of the presser foot.
%8
%9

14) Position of the thread guide

1 Middle thread guide and thread guide holder
R
^0
%9
( Fix at the extreme right position of the slot. )
Standard Adjustment
Needles
Spun thread
Cotton thread
Wooly nylon thread
Tetoron thread
%8
−
^1
^0
Needle
Throat plate
R
Left needle
Middle needle
thread
thread
27 mm 25 mm
27 mm 25 mm
27 mm 25 mm
27 mm 25 mm
23
−
Lower bushing
0.2 mm
Spreader
Max. 8.1 mm
Right needle
thread
23 mm
23 mm
23 mm
23 mm