Table of Contents
Advertisement
Preparing Recording Media
Recovering Recordings
Some actions, such as suddenly turning off the camera or removing the card while data is being recorded, can
cause data errors in the recorded file. You may be able to recover recordings with corrupted data using the
following procedure.
34
1 Switch to MEDIA mode and open the index screen with the recordings you wish to recover (A 119).
2 Select the desired recording (with the
3 Press SET to open the file menu and select [Recover] > [OK].
• The camera will attempt to recover the corrupted data.
NOTES
• The file may not be recorded if the power is cut or if the SD card is removed immediately after starting
recording. Even if a partial recording was made, such files may be deleted if file recovery is attempted.
• In some cases, it may not be possible to recover the data. This is more likely when the file system is corrupted
or the card is physically damaged.
• Only clips and audio (WAV) files recorded with this camera can be recovered. Photos cannot be recovered.
icon).
Advertisement
Table of Contents
