Table of Contents
Advertisement
Preparing the Camera
Preparing the Camera
This section details how to prepare the camera for the first time, including how to mount and remove lenses and
the handle unit.
26
Examples of Camera Configurations
Your camera allows you to build the shooting configuration that best fits your needs and shooting conditions. For
details on the optional accessories compatible with this camera, refer to Optional Accessories (A 197) and the
Cinema EOS System Expansion User Guide (PDF file).
Configuration with microphone
holder and handle
IMPORTANT
• Be careful not to drop the camera or accessories when attaching, removing or adjusting the various
accessories. Use a table or other stable surface to change the camera's configuration.
Preparing the Lens
As much as possible, attach and remove the lens quickly and in a clean environment free of dust. You can also
use an EF lens by attaching a mount adapter to the RF lens mount. Refer also to the instruction manual of the
lens/mount adapter used.
IMPORTANT
• When attaching/removing a lens, avoid direct sunlight or strong light sources. Also, be careful not to drop the
camera or lens.
NOTES
• After removing a lens/When a lens is not attached to the camera:
- Do not touch the lens's surfaces, the lens mount or any components inside the lens mount area.
- Place the body cap back on the lens mount and the dust caps on the lens. Clean any dust or dirt from the
body cap and dust caps before using them.
Configuration with
microphone holder
Minimal configuration
Advertisement
Table of Contents
