Table of Contents
Advertisement
File Operations
Displaying Clip Information
1 Select the desired clip in the clip index screen.
2 On the file menu, select [Display Clip Info].
124
• The [Clip Info] screen will appear.
• Push the joystick left/right to move to the previous/next clip. Press the CANCEL button to return to the index
screen.
1 Thumbnail of the selected clip
2 Clip geotagged with GPS information
3 Thumbnail of the previous clip
4 Thumbnail of the next clip
5 Special recording mode (A 100)
6 Recording date and time
7 Clip file name (A 37)
8 Compression, bit rate and resolution (A 52)
1
9 Frame rate
(A 53)
1
For clips recorded using slow & fast motion recording, the shooting frame rate and playback frame rate will both be displayed.
2
XF-AVC clips only.
Displaying Additional Information (XF-AVC Clips Only)
From the [Clip Info] screen of an XF-AVC clip, you can push the joystick up/down or turn the SELECT dial to
display additional information screens.
[Lens & Q] screen: Details about the lens used to record the clip. If a user memo was recorded with the clip's
metadata, this screen will show also the user memo details.
[/ Data 1/3] to [/ Data 3/3] screens: If a custom picture file was embedded with the clip, these screens show
the custom picture settings used.
Push the joystick down repeatedly or turn the SELECT dial right to check the information screens in
the following order: [/ Data 1/3] to [/ Data 3/3] screens
1
2
3
4
5
10 Shot mark (A 125) and $ mark / % mark
(A 125)
11 Custom picture file embedded
12 Proxy clip (A 56)
2
13 Color sampling
and color bit depth (A 53)
14 Clip's start time code
15 Clip's end time code
16 Clip duration
[Lens & Q] screen
6
7
8
9
10
11
12
13
14
15
16
2
2
(A 112)
[Clip Info] screen.
Advertisement
Table of Contents
