Dell EMC PowerEdge T440 Installation And Service Manual page 12

Table 2. Front panel features
Item Components
4 Information tag
5 USB port 2.0
6 USB port 3.0
7 Optical drive bay
8 Drive slot
9 Physical drives
Figure 4. Front panel view of 8 x 3.5-inch hot swappable drive system in rack mode
Table 3. Front panel features
Item Components
1 Power button
2 System identification
button
12 Dell EMC PowerEdge T440 system overview
Icon Description
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information tag
also contains the iDRAC secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
The USB port is USB 3.0 compliant.
N/A Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge T440 Technical
Specifications on the product documentation page.
N/A Enables you to install TBUs for 8x and 16x backplane configurations, or
drive blank in the empty drive slot to maintain proper system cooling.
N/A 3.5-inch drives and 2.5-inch drives/SSDs.
Icon Description
Indicates if the system is powered on or off. Press the power button to
manually power on or off the system.
NOTE:
compliant operating system.
The System Identification (ID) button is available on the front and back
of the systems. Press the button to identify a system in a rack by
turning on the system ID button. You can also use the system ID button
to reset iDRAC and to access BIOS using the step through mode.
Press the power button to gracefully shut down an ACPI-