Dell EMC PowerEdge T440 Installation And Service Manual page 10

Table 1. Front panel features
Item Components
3 Status LED indicator
panel
4 Information tag
5 USB port 2.0
6 USB port 3.0
7 Optical drive bay
8 Drive slot
10 Dell EMC PowerEdge T440 system overview
Icon Description
turning on the system ID button. You can also use the system ID button
to reset iDRAC and to access BIOS using the step through mode.
N/A
Indicate the status of the system. For more information, see the
Dell EMC PowerEdge T440 Technical Specifications on the product
documentation page.
N/A
The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If you
have opted for the secure default access to iDRAC, the Information tag
also contains the iDRAC secure default password.
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
The USB port is USB 3.0 compliant.
N/A Enable you to install drives that are supported on your system.
For more information, see the Dell EMC PowerEdge T440 Technical
Specifications on the product documentation page.
N/A Enables you to install TBUs for 8x and 16x backplane configurations, or
drive blank in the empty drive slot to maintain proper system cooling.