APRILIA Tuono 660 2021 Service Station Manual page 155

RS 660 - Tuono 660
•
Insert the control unit (20) in the sup-
port and connect the "vehicle" and "en-
gine" connectors (21).
Removing the idle gear
To proceed with the removal of the intermediate
gear, it is necessary to first remove the flywheel
and the starting ring gear.
•
Then remove the intermediate gear
from its seat.
Fitting the idle gear
To install the intermediate gear correctly, proceed
as follows:
•
Generously lubricate the gear rotation
pin with engine oil
Engine
ENG - 155