Table Of Contents; Introduction - McCulloch SUPERLITE 4528 Operator's Manual

Introduction..................................................................... 4
Safety..............................................................................5
Operation........................................................................ 8
Maintenance................................................................... 9
Product overview
(Fig. 1)
1. Operator's manual
2. Rear handle
3. Throttle trigger lockout
4. Fuel tank cap
5. Choke control
6. Front handle
7. Blade and blade guard
8. Transport guard
9. Air filter cover
10. Air purge bulb
11. Fuel tank
12. Handle lock
13. Throttle trigger
14. Spark plug cap and spark plug
15. Cylinder cover
16. Starter rope handle
17. Stop switch
18. Lubricant filler cap
19. Gear housing
20. Hand guard
21. Combination wrench
22. Tube of grease
Product description
The product is a hedge trimmer with a combustion
engine.
Intended use
Use the product to cut branches and twigs. Do not use
the product for other tasks.
Symbols on the product
(Fig. 2) WARNING! This product can be dangerous
and cause serious injury or death to the
4
Contents
Troubleshooting............................................................ 12
Transportation, storage and disposal........................... 13
Technical data.............................................................. 13
EC Declaration of Conformity....................................... 15

Introduction

(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
yyyywwxxx
x
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
Euro V Emissions
operator or others. Be careful and use the
product correctly.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
Use approved hearing protection and
approved eye protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
Air purge bulb.
Choke.
Lock for handle adjustment.
Fuel.
Noise emissions to the environment
according to European Directive 2000/14/EC
and New South Wales legislation "Protection
of the Environment Operations (Noise
Control) Regulation 2017". Noise emission
data can be found on the machine label and
in the Technical data chapter.
The product agrees with the applicable EC
directives.
The rating plate shows serial number. yyyy
is the production year and ww is the produc-
tion week.
WARNING: Tampering with the engine voids
the EU type-approval of this product.
1255 - 002 - 08.09.2020