Advertisement
Contents
Connections
Connecting a playback device
You can connect turntables, CD players and network audio players to this unit.
If you set this unit's input source to "PHONO" and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
CD player
AUDIO
OUT
R
Turntable
R
L
R
L
AUDIO
GND
OUT
L
R
Front panel
Rear panel
Playback
Network audio
player
AUDIO
OUT
L
R
L
R
L
R
L
Remote control
unit
Settings
NOTE
0 The earth terminal (SIGNAL GND) of this unit is not for safety grounding purposes. If this
terminal is connected when there is a lot of noise, the noise can be reduced. Note that
depending on the turntable, connecting the ground line may have the reverse effect of
increasing noise. In this case, it is not necessary to connect the ground line.
0 The PHONO input terminals are equipped with a short pin-plug. Remove this plug to connect a
record player. Store the removed short pin-plug in a safe place so as not to lose it.
17
Index
Tips
Appendix
Advertisement
