Denon PMA-A110 Owner's Manual page 33

Contents Connections
6
Press X on this unit.
When the unit power is turned on, the PC automatically finds and
0
connects to the unit.
7
Press INPUT SELECT to switch the input source to
"USB-DAC".
8
Checking the installed driver.
A Click the "Start" button and click "Control Panel" on the PC.
The control panel setting list is displayed.
0
B Click "Sound".
The sound menu window is displayed.
0
C Check that there is a checkmark next to "Default Device" under in
"PMA-A110" of the "Playback" tab.
When there is a checkmark for a different device, click "PMA-
0
A110" and "Set Default".
Front panel Rear panel
Playback Settings
9
33
Remote control
unit
Tips
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A Select "PMA-A110" and click "Properties".
The Properties window is displayed.
0
PMA-A110
Index
Appendix
q