Table of Contents
Advertisement
APWeb – Controlling the Octaire
Home Page
The Home page for APWeb contains information on the system's routing levels (referred to as virtual
matrices or VMs in APWeb) and the number of currently defined macros. The site name can be
customized to uniquely identify your Octaire system (contact your Network Administrator).
APWeb's Home page
FIG. 43
Home Page Links
The links on the left side of the Home page access the pages listed below:
Link
Home
Controller
Execute Macro Execute Macro
Contact Info
Executing & Disconnecting Switches
XBar Controller Overview
Switches can be executed and disconnected on the Octaire by using the XBar, a graphic interface control
panel. The XBar controls specific parts of the system through routing levels. For example, the XBar may
switch audio-follow-video signals on one routing level, video on another, and audio on yet another. The
routing level selected will determine which part of the system is available for control in the XBar.
An APWeb server provides access to a single Octaire system from a specific IP address and can be
accessed from up to five PCs at the same time. If you are controlling the same system as other users, you
can open the VM Selection Pad and update status as needed (see page 91). The VM Selection Pad is also
used to change routing levels. Keep in mind that executing switches on one routing level may affect the
routing state on the other routing levels.
Note: Contact your Network Administrator if you need to change the name of the site.
88
Page
Home
The main page in the APWeb site
XBar Controller The controller interface for executing and disconnecting switches (page 88)
For executing predefined macros
Contact Info
Displays the AMX address, phone and fax numbers, and website link
Customizable site name
Click for AMX Website
Current routing levels (VMs)
Number of defined macros
Links
Function
Octaire Instruction Manual
Advertisement
Table of Contents
