Fortinet FortiGate-7000F Series System Manual page 54

FortiGate-7000F System Management Module
<slot> option is not available on the passive SMM.
Action
Log into the CLI.
Log out of the CLI.
Available on the
passive module.
Display all
commands.
Available on the
passive module.
Display information
about all SMC
firmware in the
chassis.
Display SMC device
ID, Build
Date/Number, SMC
firmware information,
address info, entity
map for the device in
the slot. Available on
the passive module.
Switching active
SMM. The active
SMM becomes
passive and the
passive becomes
active. Available on
the passive module.
Display status,
power budget and
hot swap state for all
modules. Available
on the passive
module.
List the IPMI
channels.
Change the SDI
verbosity level.
<level> can be:
0: Alerts + Errors
1: Alerts + Errors +
Verbose + Low-Level
FortiGate-7121F System Guide
SMC CLI Commands
Ctrl-R
exit (followed by Ctrl-R)
help
info
info <slot>
smm_switch
status
channel list
verbose <level>
Fortinet Technologies Inc.
IPMI Commands
N/A
N/A
help
mc info
N/A
N/A
N/A
channel info [<channel-number>]
N/A
54