Fortinet FortiGate-7000F Series System Manual page 23

FortiGate-7000F hardware assembly and rack mounting
Attaching network cables to the cable mount levers
Installing horizontal cable mount levers
From the inside, insert the mount
1
lever through the top hole in the side
bracket and extend it a short distance
past the side bracket.
Insert the other end of the mount
2
lever into the top hole in the bracket
on the other side of the chassis.
3
Press the mount lever down until
held in place by the rubber retainer
in each bracket.
Attach cable ties to the mount levers.
Tie cables to the mount lever
using the second round of the
cable tie.
FortiGate-7121F System Guide
Rubber
retainer
Cable management
Maintain a greater than 1-inch
(2.5-cm) network cable
1
2
3
bend radius
Fortinet Technologies Inc.
23