Parts Information - CAMAG TLC SCANNER 4 Instruction Manual

2
Parts supplied
Part No. Quantity
140.6200 1
115.0123 2
115.0124 2
115.6217 1
125.1028 1
362.0008 2
1
705.0018 1
705.0012 1
B.027.6200E 1
Spare parts
Part No. Description
027.6440 Mercury vapor lamp
027.6441 Deuterium lamp
027.6442 Halogen-Tungsten lamp
352.0014 Lamp compartment illumination 254 nm
352.0013 Lamp compartment illumination 366 nm
352.0019 Lamp compartment illumination Cool White
• When working with UV light, especially with short-wave UV
light, be sure to protect your eyes and skin from direct radiation,
which inevitably causes irritation and inflammation. Ordinary
goggles provide protection, but it is advisable to wear safety
glasses or a face shield and gloves. See table with intensities and
maximum exposure times (daily dose) in this manual
• Servicing the instrument with the lamp compartment open and
the Mercury or Deuterium lamp ON can be dangerous because
of the emitted UV light. Protective goggles and UV absorbent
gloves must be worn
• To ensure sufficient cooling, the ventilation holes of the instru-
ment must never be obstructed

Parts information

Description
Accessory kit
L-shaped magnetic strip
Magnetic strip
Foil-holder
RS232 connection cable
Fuse 230V, 2A slow blow
Power cord
Screwdriver Allen key type 2.5mm
Screwdriver Allen key type 3.0 mm
Manual TLC Scanner 4
Instruction Manual, June 2018
TLC Scanner 4
Page 5