Precautions - CAMAG TLC SCANNER 4 Instruction Manual

1.1 Precautions

• This sign indicates (on instrument and in this manual) that fail-
ure to take note of the accompanying information may result in
damage of the instrument
• Spare fuses must be of the type specified by the instrument
manufacturer. It is forbidden to short-circuit or manipulate fuses
• This symbol indicates that this equipment must not be disposed
of as unsorted municipal waste but is to be collected separately
as electrical and electronic equipment (WEEE-Directive
2002/96/EC). To properly recycle the instrument or parts of it
you are requested to send the equipment back to the distribu-
tor, producer or an adequate collection system at the end of its
life. This will have potential effects on the environment and hu-
man health
• Please read this operating manual before starting the installa-
tion! This manual contains information and warnings the user
has to follow to ensure reliable operation of the instrument
• If the instrument is used in a manner not specified in this man-
ual, the protection provided by the equipment may be impaired
• Attention: For safety reasons the instrument may only be used
for the purposes described in the operating manual
• The instrument is manufactured and tested in accordance with
the respective European safety publications shown on the Dec-
laration of Conformity (DoC). The instrument complies with
safety class 1 and has been designed for indoor use only (IP 20).
Further, this device has passed the CAMAG Quality Assurance
tests and has been delivered in safe operation condition. For
detailed instrument data see chapter technical data
• To avoid injury use adequate safety equipment (protective gog-
gles, gloves etc. if applicable) when working with the instru-
ment
• Before first operation, check whether the voltage shown on the
instrument matches your local mains voltage. The power cord
may only be connected to a grounded, fused (not higher than
16A) outlet. Do not use extension cords without ground contact
• The instrument may be used only by properly trained laboratory
staff
• The instrument may not be used in rooms with danger of ex-
plosions
Instruction Manual, June 2018
TLC Scanner 4
Page 3