Download Print this page
Sekonic SPECTROMASTER C-7000 Startup Manual

Sekonic SPECTROMASTER C-7000 Startup Manual

Spectrometer
Hide thumbs Also See for SPECTROMASTER C-7000:

Advertisement

Quick Links

SPECTROMASTER
C-7000
Startup Guide
Thank you for purchasing a SPECTROMASTER C-7000.
This Startup Guide introduces the basic operations of this Color Meter.
For details about how to use this spectrometer, please see the
Operating Manual on the CD-ROM (included with the products).
1. Download
Please visit
www.sekonic.com
version of Utility and the operating manual as follows:
Utility
https://www.sekonic.com/support/downloads/
c-700_800seriesutilityformacandwindows.aspx
Operating Manual
http://www.sekonic.com/support/instruction
manualuserguidedownload.aspx
2. Check Included Items
The following items are included with the meter
in the package.
Please be sure to check that all noted items are included.
★ If any items are missing, please contact the distributor or the reseller you purchased
the meter from.
★ Batteries (2 AA) are not included in the package. Please obtain these separately.
Meter
Startup Guide
( this document )
SPECTROMASTER
English
Deutsch
Français
中文
Español
Italiano
日本語
Safety
Precaution
Safety Precaution
 For Proper Operation
Before using this product, please read this "Safety Precautions" for
proper operation.
The WARNING symbol indicates the
WARNING
C-7000
possibility of death or serious injury if the
product is not used properly.
The CAUTION symbol indicates the
CAUTION
possibility of minor to moderate personal
injury or product damage if the product is
not used properly.
Startup Guide
Color Meter
The NOTICE symbol indicates cautions
or restrictions when using the product.
Startanleitung
NOTICE
Spektrometer
Please read all notes to avoid errors in
operation.
Guide de démarrage
Spectromètre pour
 General Safety Information
• Read the Operating Manual before use.
光谱仪适用于照相摄影
使用简介
• Keep the Operating Manual on hand for reference at any
time.
Guía de inicio
Espectrómetro
• Stop using this product when there are any abnormalities.
• The modification or disassembly of this product is prohibited.
Spettrometro
Guida introduttiva
• Do not attempt to repair this product by yourself.
• This product is intended only for persons with expert
スタートアップガイド
分光色彩照度計
knowledge.
• Monitor children so that they do not touch this product.
• Use this product in a usage environment described in the
Operating Manual.
• This product is not waterproof.
Spectrometer
to download the latest
Safety
Requirement and
Precaution
English
WARNING
English
There is a danger of electrical shock when using high
Intended Usage
voltage strobes.
Avoid contacting the terminals.
The meter is designed for:
This product emits electromagnetic waves.
• Measuring correlated color temperature, deviation, color rendering
Do not bring this product close to persons with
properties (CRI, TM-30, SSI, TLCI/TLMF), illuminance, tristimulus
pacemakers.
value,chromaticity coordinates, dominant wavelength and excitation purity
of various lighting sources such as LEDs, organic EL's and projectors.
Do not use this product in an explosive atmosphere.
• Measuring automotive LED headlights and other types of lamps.
• Measuring the illuminance of optical bio-reactions.
• Controlling the illuminance and monitoring spectral distribution of light
Use of devices emitting electromagnetic waves is
source for indoor agriculture.
prohibited in hospitals.
• Evaluating the illuminance, color temperature, and color rendering index
of road lighting, indoor lighting, store lighting, and others.
CAUTION
• Checking the quality, illuminance and color of light source in production of
any kinds of light source manufacturers.
• Check the material of the neck strap to see if there is any
Power Supply
risk of allergy.
• Be careful of sudden emission of lights from strobes.
• AA batteries:
: 1.5V × 2 (alkaline, manganese)
• USB bus-power
: 5V/500mA or less
NOTICE
via USB cable when connected to computer
• Do not leave this product on car dashboards in hot weather.
(Limited Power Source or Class 2 Power Source)
This may damage the product.
USB Connection
• Remove the batteries when this product is not in use for a
long period of time.
• The application software of "C-700/C-7000 Series Utility" can be used to
save the measurement and graphic display, change the meter setting and
• When the desired performance is not achieved, stop using
update the firmware while meter is connected to computer or tablet by USB
this product and contact the service center.
cable.
Environmental Condition
 Information for Users on Collection and
• Indoor use
Disposal of Old Equipment
• Altitude of operation (m)
: Max 2000 m
To protect environment, do not through this device
• Pollution degree (PD)
: PD2
and batteries away with the normal household waste
• Operating temperature
: -10°C ~ 40°C (without condensation)
at the end of those life, but bring them in at an
: 85%RH or less (at 35°C)
official collection point of your country for recycling.
• Operating humidity
(without condensation)
Soft Case
Safety Precaution
WARNING
• Infants or toddlers may accidentally wrap the strap around their necks, so please place it in a
location out of their reach. There is a danger of suffocation.
• Do not place batteries in open flames, attempt to short, disassemble or apply heat to them,
or use unspecified batteries. They may burst and cause fires, serious injury, or damage the
environment.
• Do not use the spectrometer in a place containing flammable or combustible vapors. Otherwise,
it may cause a fire.
• Do not drop fluids on the spectrometer. Also, do not attempt to insert metals into it.
Doing so may cause a fire or an electric shock. If any fluid drops on or a metal is inserted into
Strap
the spectrometer, turn the power OFF immediately, and remove the battery (or unplug the USB
power cable). Then, consult our Support Center for assistance.
• Do not disassemble or modify this spectrometer. Doing so may cause a fire or an electric shock.
CAUTION
• Do not handle this product with wet hands, or leave it in the rain or in a location where water
may splash on it, where the product may be submerged in water, or it may come in contact with
moisture. There is a danger of electric shock if the "Flash Light Cord (PC) Mode" is used. This
may also result in damage to the product.
• Do not attempt to disassemble the product for modification or parts replacement. It may affect
measurement results or damage the meter.
• Any significant impact to the meter housing or LCD screen can cause physical damage and
failure of performance. Even when the meter is in the bag or pocket, damage is possible under
severe impact or pressure conditions.
• When controlling the meter with the LCD, gently touch with your finger. Using pointed pens or
pencils may scratch the LCD screen or damage the product.
• If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
• Infants or toddlers may accidentally grab the strap and swing the product, so please place it in a
location out of their reach, as the meter may be damaged by impacts.
• Be careful that the neck strap does not come loose when carrying the product, as the meter may
be damaged when dropped.
• Do not use or store the product in a place where it may be dropped and damaged by impacts
or where it will be affected by constant vibration. This product contains precision optical
components, and it may be damaged by these mechanical shocks. Also, do not subject the
product to vibrations or impact when handling.
• Keep this product away from excessive dust, high humidity, and corrosive gases. Otherwise a
product failure may occur.
• Do not measure a bright object that emits light exceeding the measuring range (wavelength and
illuminance). They may damage the optical components and result in inaccurate measurement.
• Before removing or replacing the battery or USB cable, always turn the power OFF.
Otherwise, the product may fail.
• Do not place the product on an unstable or tilted bench. Otherwise, it may drop and you may
be injured.
English
<Utility>
<Manual>
CD-ROM
USB
Mini-B cable

Advertisement

loading

Summary of Contents for Sekonic SPECTROMASTER C-7000

  • Page 1 SPECTROMASTER C-7000 Startup Guide Thank you for purchasing a SPECTROMASTER C-7000. This Startup Guide introduces the basic operations of this Color Meter. For details about how to use this spectrometer, please see the Operating Manual on the CD-ROM (included with the products).
  • Page 2 3. Names of Parts [ Bottom View ] [ ] [ Rear View ] Front View ❶ Light Receptor ❷ Light Selection Ring ❸ Power Button ❹ Display Panel ❺ Measuring Button ⓫ USB Mini-B Connector ⓬ Sync Terminal ❿ Tripod Socket ⓭...
  • Page 3 ★ If Dark Calibration Position Confirmation screen appears, set the Light Selection ❷ Ring to Dark Calibration position and perform calibration again. Dark Calibration Position * If "Please set Light Selection Ring for dark Confirmation Screen calibration" is displayed, set the Light Selection Ring ❷...
  • Page 4 Measuring Mode Icon Description Ambient Light Measures continuous light such as sunlight, tungsten, fluorescent, and LED Mode lights. Cordless Flash Detects flash light without meter-flash connection after Measuring Mode Button pressed to arm meter (for 90 seconds) and flash fired separately. Cord (PC) Flash Detects flash light with PC (synchro) cord meter-flash connection.

This manual is also suitable for:

401-710