Maintenance - Coleman SaluSpa 90363 Owner's Manual

Maintenance

NOTE: Your spa will require additional air to be added from time to time. Changes in
temperature from day to night will change the pressure in the spa and may cause a
certain amount of deflation. Please follow the Assembly instructions and drain the
spa before inflating to the accurate pressure needed.
CAUTION: YOU MUST ENSURE THE PUMP IS UNPLUGGED BEFORE
BEGINNING SPA MAINTENANCE TO AVOID RISK OF INJURY OR DEATH.
Filter Cartridge Maintenance
NOTE: To ensure your spa water stays clean, check and clean your filter cartridges
every day follow the steps below.
P6653
Filter Set
NOTE: We recommend changing your filter cartridges every week or, if the filter
cartridges remain soiled and discolored, they should be replaced.
Water Maintenance
Keeping your spa water clean and chemically balanced is necessary. Simply cleaning
the filter cartridge is not enough for proper maintenance, we recommend you use
pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not
use granules) with the chemical dispenser.
NOTE: We recommend you take a shower before using your SaluSpa, as
cosmetic products, lotions, and other residues on the skin can quickly degrade
water quality.
To use the chemical dispenser, please follow the below instruction.
Using chemical tablets (not included):
Using chemical liquid (not included):
NOTE: Remove the chemical dispenser from spa when the spa is in use.
IMPORTANT: After performing chemical maintenance and before using the spa, use
a test kit (not included) to test the water chemistry. We recommend maintaining your
water as below table.
Filter Cartridge
pH
Total Alkalinity
7.4-7.6
90352E
80-120ppm
9
Free Chlorine
2-4ppm