How To Select Diesel Fuel - Detroit Diesel DD15 EuroIV Operator's Manual

NOTICE: Do not add oil if the oil reading is between the crosshatch area on
the dipstick. There are approximately 5.0 L (5.2 qt) from the fill mark to the
full mark. Overfilling the oil pan can cause engine damage.
NOTE: If the engine operating temperature is below 60°C (140°F), the
engine must be on a level surface and then shut down for 60 minutes for an
accurate oil level reading. Otherwise, the engine must be brought up to an
operating temperature of 60°C (140°F), parked on a level surface and then
shut down for five minutes for an accurate oil level reading.
13. Check the filter housing for signs of leakage.
14. Stop the engine. Check the oil level again per the following guidelines. If
necessary, add oil no more than 5.0 L (5.2 qt) at a time up to the maximum
fill level on the oil dipstick.

How to Select Diesel Fuel

All EuroIV DD engines are designed to operate on Low Sulfur Diesel fuel.
Quality
NOTICE: Use only Low Sulfur Diesel (LSD) fuel (500 PPM sulfur content
maximum), based on ASTM Standard D 2622 test procedure.
All information subject to change without notice.
DDC-SVC-MAN-0175 Copyright © 2014 DETROIT DIESEL CORPORATION
DD Platform EuroIV Operators Manual
81