Ascaso BABY T ZERO User Manual page 21

To enter programming mode, we must press key 3 and immediately and without
releasing this one press also key 2 (counting from the left) of the first keypad. The 3
keys and the displays will be off. Then press key 3 for 10 seconds. Then the display on
the left will show the different programming options according to the previous table.
Use key 2 to move forward and key 1 to move backward between the different
options. Use key 5 to enter the selected option to change the value programmed
previously. Once inside the option to modify, with the keys 1 and 2 we increase /
decrease the value of it, and with the key 3 we confirm the modification, returning to the
programming menu.
To exit the programming menu, we must search for the ESC option and select it using
the 3 key. The keypads and displays will be off. We must activate them again by
pressing the 2 key.
IMPORTANT!
We can reset the programming parameters by pressing keys 1, 2 and 3 on the
button pad with the machine turned off. Without releasing them, we activate the
general switch until the Prt text appears on the group one screen. Then, we release
the keys, and turn off and on again the machine. Press button 2 to activate.
IMPORTANT!
Alarms. The displays on each keypad also give information about the problems that
may arise in the different components through the following list of alarms.
AL2 Group flow meter fault
AL3 Probe temperature group fault
AL4 Group element fault
AL5 Circuit fault
AL6 Maximum filling boiler time
AL7 Boiler temperature gauge fault
AL8 Boiler element fault
IMPORTANT!
It is possible to activate the machine so that only the keypads and screen are
illuminated, disconnecting the elements and alarms. To connect the machine in
this way, with the machine off, press keys 1 and 2 of the button pad, and keep
them pressed while activating the main switch, until the keypads and screen are
illuminated. To deactivate, we must repeat the same operation.
MANUAL BABY T ENG-ESP_DE 2020 .indd 21 MANUAL BABY T ENG-ESP_DE 2020 .indd 21
21
22/09/2020 16:29:13 22/09/2020 16:29:13