Functional Description - Bosch AVENAR 8000 Installation Manual

AVENAR keypad 8000
Notice!
Do not use tools with sharp edges (e.g. screw drivers or pens)
to operate the device or its touchscreen.
Notice!
The device may not be exposed to direct sunlight.
Notice!
Touchscreen recalibration is required to be performed at least
once a year. Otherwise operating the device may be difficult or
even not possible without prior re-calibration. For further
information, see the necessary procedure in the user guide.
Notice!
Painted surface. Handle with care to prevent damage. Clean the
surface only with a slightly damp soft cloth.
2

Functional Description

The Remote Keypad can be used to perform the same operating
procedures as the control panel, enabling variable operation of a
networked system. It has the following functional elements (see
01, page 4 ):
Pos. Designation
A Interfaces
B Touchscreen
C 6 fixed
buttons
D Memory card
slot
Bosch Sicherheitssysteme GmbH
Function
CAN1, CAN2, IN1/2, Rail
Operating the networked system through virtual
buttons and variable display windows
Standard entries
Memory card reader for maintenance services
Functional Description | en
2020.05 | 8.0 | F.01U.347.558
41