Preparation Of Optical Axis Adjustment Spring; Processing Method - Sony E-mount SEL200600G Service Manual

Service Tools/Equipments
Optical axis adjustment spring
Optical axis adjustment pin
Adhesive bond (B-110)
5-1-4. Preparation of optical axis adjustment
spring
Use three optical axis adjustment spring.
Prepare the following part for two pieces, and add processing.
• 4-697-842-01 SPRING (8000), PRESET RING
(repair parts for SEL400F28GM)

Processing method

Prepare a total of three optical axis adjustment spring by cutting at the
four turns position (about 3 mm) from the end of Preset Ring Spring.
Part No. Fig. No.
― ―
J-6082-897-A ―
J-6082-617-A ―
5-5
For optical axis adjustment (B06 frame assy)
For partial blur adjustment (B06 frame assy)
Use three optical axis adjustment spring. (refer to "5-1-4. Preparation
of optical axis adjustment spring")
For optical axis adjustment (B06 frame assy)
Use two optical axis adjustment pins.
For partial blur adjustment (B06 frame assy)
SEL200600G
Remarks
SYS SET