Canon WUX500ST Quick Start Manual page 55

2
Press the pointer button of the corner for correction, and then press the
OK button.
Remote control
3
Press the pointer buttons to adjust the corner.
Remote control
4
When you have finished correcting, press the OK button.
Corner adjustment settings will be cleared if you subsequently use [Zoom] in the [Install
settings] menu.
■ Resetting the Keystone Adjustment
Horizontal-vertical keystone and corner adjustment can be reset as follows.
First, press the KEYSTONE button on the remote control twice to display the
[Keystone reset] window.
Next, select [OK] with the [ ] button, and then press the OK button.
Your specified keystone adjustment is now reset.
Projector
Projector
55
Correct the Image Distortion