Canon WUX500ST Quick Start Manual page 15

Installation and Handling Precautions
Pay attention to the following points regarding installation and handling of the projector.
Failure to do so may cause a fire, electric shock or personal injury.
• Do not use the projector where it might get wet, such as outdoors
• Do not place containers containing a liquid on top of the
• Do not touch the projector itself, the power cord, or the cable if
• Do not move the projector until you have switched off the power,
• Unplug the projector before cleaning or maintenance.
• Do not install the projector in a location that is damp or dusty, or
• Make sure to implement anti-fall measures such as an anti-fall
• Do not remove the cabinet from the projector or disassemble it.
• Do not disassemble or modify the projector (including
or by bathtubs or showers.
projector.
lightening strikes.
removed the power plug from the power outlet and unplugged
any other cables.
where there is a lot of oily smoke or steam. Oil can degrade the
plastic, which could result in a ceiling-mounted projector falling
from its mounting.
wire when installing the projector in high places, for example,
installing it on the ceiling.
The interior of the projector contains high-voltage components as
well as parts that are hot. If inspection, maintenance or repair is
required, contact the Canon Customer Support Center.
consumable parts) or the remote control.
15
Safety Instructions