Canon WUX500ST Quick Start Manual page 28

Preparing the Remote Control
Part Names
The projector can be operated using buttons on the remote control or the side
control on the projector.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) POWER button (P40, P60)
Turns the projector on or off.
(2) BLANK button
Toggles between display / non-display
of image.
(3) ASPECT button
Changes the aspect ratio mode.
(4) KEYSTONE button (P53)
Corrects keystone distortion.
(8)
The [Keystone] setting enables both
horizontal/vertical keystone correction
(by adjusting top/bottom/left/right
length) and corner correction.
(9)
(5) D.ZOOM button
Zooms the image in or out digitally.
[ ] button: Zooms the image in (up to
[ ] button: Zooms the image out (1x
[ ] / [ ] / [ ] / [ ] buttons:
(6) IMAGE button (P56)
Switches the image mode (image
quality).
(7) GAMMA button
Adjusts the gamma of the image.
(8) INPUT button (P41)
Switches the input signal.
(9) AUTO PC button (P45)
Adjusts tracking etc. automatically in
accordance with the signal from a
computer when the analog PC input is
selected.
28
12x).
minimum).
Move the zoom-in location.