Connecting Condensate Drainage; Front Panel Removal - LG THERMA V HN0916T Installation Manual

Connecting Condensate drainage

Step 1. Before the indoor unit's final positioning, attach the
flexible Ø16 hose to the drainpipe, which has been
prepared in advance. Insert the drainage hose into
the drain ①, which leads to the sinkhole or storm
drain. Seal the gap with a suitable gasket.
Step 2. Then push the appliance to the wall ②.
CAUTION
!
• Attaching the hose for the condensate drain to the
sewer hose can cause corrosion of the appliance's
internal components.
• The drain pipe must have an odor trap!
Step 3. Before connecting any pipes, level the indoor unit
with supplied adjustable levelling feet.

Front Panel Removal

Step 1. Disconnect the remote control case from the front
panel and disconnect the remote control cable.
CAUTION
!
After installation is completed, return the remote control
to its original state.
NOTE
Use a flat-blade screwdriver or a coin to remove the
remote control case.
Step 2. After releasing a screw from the top the indoor unit,
detach front panel ①. Tilt the front panel towards
you ② and lift it ③ for opening.
INSTALLATION OF INDOOR UNIT
②
①
②
③
35
①