Step 8 Attach Cables,
Cable Connector Ends When connecting chassis connectors to the
MegaRUM II PCI Motherboard User's Guide
16
Continued
motherboard, make sure to connect the correct connector
end. Most connector wires are color-coded. Match the
color of the wires leaving the switch or LED to the same
pin on the connector end. There may be more than one
connector with the same color-coded wires. If so, follow
the wire to the switch or LED. All motherboard
components are outlined by a white rectangular box with a
broad arrow at one end. Pin 1 is always at the arrow end
of the white outlined box, as shown below:
Cont'd