American Megatrends Apollo IV User Manual page 17

Step 2 Set Jumpers,
EP1, EP2 Flash ROM Type EP1 and EP2 are 3-pin bergs that specify the type of flash ROM
installed on the motherboard. The settings are:
Flash ROM Type
Intel 28F001
SST 29EE010
MXIC MX28F2000
SST 29EE020
ATMEL AT29C020
AMD 28F020
Avoid Static Electricity
Static electricity can damage the motherboard and other computer
components. Keep the motherboard in the anti-static bag until it is to be
installed. Wear an anti-static wrist grounding strap before handling the
motherboard. Make sure you stand on an anti-static mat when handling the
motherboard.
Avoid contact with any component or connector on any adapter card, printed
circuit board, or memory module. Handle these components by the mounting
bracket.
Chapter 1 Hardware Installation
Continued
EP1
Short Pins 2-3
OPEN
Short Pins 2-3
OPEN
OPEN
Short Pins 1-2
EP2
Short Pins 1-2
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
Short Pins 2-3
13