Table of Contents
Advertisement
Installing Chassis Rails
Make sure that the chassis covers and chassis rails are installed on the chassis before you
install the chassis into the rack.
To avoid personal injury and property damage, please carefully follow all the safety steps
listed in this section.
Before installing the Chassis rails
1. Enclose the chassis with chassis covers.
2. Unplug the AC power cord(s).
3. Remove all external devices and connectors.
Procedures to Install Chassis Rails
Included in the shipping package are a pair of rail assemblies. In each rail assembly,
locate the inner rail and the outer rail.
Press the locking tab to release the inner rail from its locking position and pull out the
inner rail from the rail assembly. (*The inner rails are to be attached to the chassis and
the outer rails are to be installed in the rack.)
Pull out the Inner
rail (to be
attached on the
chassis)
6
StorTrends® 3100 Set Up Guide
Outer rail (to be installed in the
rack)
Press the Locking Tab
Advertisement
Table of Contents
