American Megatrends StorTrends 3100 Setup Manual page 33

SAN Volume Name
In the Enter Name field, enter a name for your SAN Volume. The SAN Volume Name
must be alphanumeric, not have any spaces and be between one and 63 characters in
length.
SAN Volume Size
In the Enter the Size field, enter the size that you want to use for your SAN Volume. Use
the drop down menu to select either GB or TB depending on your desired configuration.
Volume Type
Place a check next to Create Target to create and assign a Target to this SAN Volume.
Create Target and Target Name
Under the Target Name section, type in a name for your Target. The Target Name must
be alphanumeric, not have any spaces and be between one and 63 characters in length.
Place a check next to the other options you wish to enable. Click the Next button to
continue.
StorTrends® 3100 Set Up Guide 33