Epson PLQ-50 User Manual page 52

Messages
State of Lights Beep pattern
Remove paper.
N Power
F Ready
N Offline
Printer error
N Power
F Ready
Close the printer cover.
N Power
N Offline
Printing stops due to overheating of the print
head. Wait till the head cools.
—
N Power
F Offline
Printer error. Contact Epson Support.
Non-printing features are available.
N Power
F Ready
F F1/Eject
F Offline
F F2
N = on, F = flashing
= short series of beeps (three beeps)
= long series of beeps (five beeps)
= short series of beeps (five beeps ×2)
PLQ-50/PLQ-50CS/PLQ-50M/PLQ-50CSM/PLQ-50CSK
Problems and Solutions
❏
Paper is not fully ejected. Press the F1/Eject button to eject paper or
see "Clearing a Paper Jam" on page 58 for instructions on ejecting
paper.
❏
Paper is jammed in the printer. Clear the paper jam, see "Clearing a
Paper Jam" on page 58 or press the Offline button to clear the error.
❏
The paper size setting may not match the size of the paper you are
using. Check if they match.
There can be a variety of causes. It can also be due to your application
software. Contact your administrator for help.
The printer cover is open. Stop the operation and close the printer cover.
or —
The print head is overheated. Wait for a few minutes; the printer resumes
printing automatically once the print head cools.
An unknown printer error has occurred. Turn off the printer and leave it off
for several minutes; then turn on the printer again. If the error recurs,
contact your dealer.
User's Guide
Troubleshooting 52