Meyer Sound LEO Series Assembly Manual page 24

CHAPTER 4: LOUDSPEAKER GUIDEALINKS
For Ultra-weatherized versions of the LINA (see "ULTRA Weather Protection Version" on page 83), the
NOTE:
11° position is not available.
The splay angles listed on the GuideALink label are for relative angles between the center axes of the
NOTE:
linked units. For example, setting the GuideALink to "5" yields a 5-degree downtilt of the lower unit relative to
the upper unit. How the loudspeakers relate to the floor, stage, and seating angles in the venue depends on the ori-
entation of the MG-MINA/LINA/750-LFC grid, the angles of the loudspeakers in the array above them, whether they
are flown or ground-stacked, and other factors. MAPP can be used to calculate optimum splay angles for loudspeak-
ers and to predict coverage patterns for arrays.
Optimal acoustical performance for LINA arrays is achieved by using the appropriate number of units
NOTE:
and appropriate splay angles to meet the coverage requirements of the venue. You can use MAPP to verify
designs and rigging configurations.
16