American Dynamics ADCDH Specification Sheet

ADCDS camera specifications
Type / Format NTSC
Scanning Element
2:1 Interlace,
H15.734KHz / V :59.94Hz
Image Picture Element
1/3" Interline CCD
Effective Picture Element 510(H) x 492(V)
Approximate pixels 380K
Resolution (TV lines) 330
Minimum Illumination 0.7 Lux @ F1.2
S/N Ratio
48dB
Exposure Control DC Auto IRIS
Sync System Internal
Gamma Compensation 0.45
Video Output
1.0Vpp, 75 ohm Unbalanced
White Balance Automatic White Balance
Auto White Balance Range 2700K – 11000K
Power Range AC: 24VAC ±20% or DC: 12VDC -10% +12%
Power Consumption 1.7W (Max)
Operating Temperature
-30 o C to +50
Storage Temperature -35 o C to +60
Regulatory Compliance
Emissions FCC part 15 Class B
CE: EN55011
ICES-003
EN55022
CISPR 11
CISPR22
ANSI C63.4
Immunity CE: EN50130-4
Safety CSA C22.2
UL60065
FCC COMPLIANCE: This equipment complies with Part 15 of the FCC rules for intentional radiators and Class B digital
devices when installed and used in accordance with the instruction manual. Following these rules provides reasonable pro-
tection against harmful interference from equipment operated in a commercial area. This equipment should not be installed
in a residential area as it can radiate radio frequency energy that could interfere with radio communications, a situation the
user would have to fix at their own expense.
CISPR 22 WARNING: This is a Class B product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
POWER SUPPLY REQUIREMENTS: For use with listed Audio/Video Product and only connected to 15W or less power sup-
ply. Power supply should be a NEC Class 2 / LPS Supply.
EQUIPMENT MODIFICATION CAUTION: Equipment changes or modifications not expressly approved by Sensormatic
Electronics Corporation, the party responsible for FCC compliance, could void the user's authority to operate the equipment
and could create a hazardous condition.
RLJ 02/2005
Please visit our website for more information
www.americandynamics.net
© 2005 Sensormatic Electronics Corporation
Product specifications subject to change without notice.
Certain product names mentioned herein may be trade names and/or registered trademarks of other companies.
8200-0206-28 Rev E
DISCOVER MINI-DOME
Camera Sheet
ADCDS ADCDH
Standard Resolution High Resolution
330TVL 540TVL
ADCDH camera specifications
PAL Type / Format
Scanning Element
2:1 Interlace,
H15.625KHz / V :50Hz
Image Picture Element
500(H) x 582(V) Effective Picture Element
430K Approximate pixels
Resolution (TV lines)
Minimum Illumination
S/N Ratio
AGC.EX Gain
AGC Preset Gain
Back Light Compensation
Exposure Control
Sync System
Line Lock (Phase Adj. Range)
Line Lock (Frequency Range)
Gamma Compensation
Video Output
o C
o C White Balance
AWB Normal Range
AWB.EX Range
Power Range
Power Consumption
Operating Temperature
Storage Temperature
E
H A S
V -P
A L C
+
–
H
L O N
X
B .E
A W
V R L L
N .S
B O N
A W
IN T O N
F L E X
B L C
A G C
ADCDW
High Resolution
Wide Dynamic Range 540TVL
NTSC PAL
2:1 Interlace, 2:1 Interlace,
H15.750KHz / V :59.94Hz H15.625KHz / V :50Hz
1/3" Interline CCD
768(H) x 494(V) 752(H) x 582(V)
380K 430K
540 (normal)
0.65 Lux @ F1.2
50dB
30dB
26dB
Central area for auto iris
DC Auto IRIS Drive
Internal/Line lock
0 o ~270 o
60Hz ±1Hz 50Hz ±1Hz
0.45
1.0Vpp, 75 ohm Unbalanced
Automatic White Balance
2700K – 11000K
2000K – 18000K
AC: 24VAC ±20% or DC: 12VDC -10% +12%
2.8W (Max)
-30 o C to +50 o C
-35 o C to +60 o C
Camera adjustments
A
ADCDS
A1
A2
B
ADCDH
B1
B2
B4
Camera adjustments for the ADCDH series
DIP switch settings
The bank of dip switches allow the following settings to be made:
Night-Saver mode (N.SVR / ON)
When ON the camera operates in monochrome mode in reduced lighting.
Auto White Balance (AWB / AWB.EX)
AWB: The camera operates in the normal Auto White Balance range 2700K~11000K.
AWB EX: The camera runs in the extended Auto White Balance range 2000K~18000K.
Line Lock (INT / LL)
In LL mode the V-Phase may be adjusted to compensate for connected supply phase differences.
Only applicable for 24VAC supply – otherwise the camera operates with INTernal sync.
Flickerless mode (FL / ON)
ON: The Camera reduces flicker in the image under fluorescent lighting.
Back Light Compensation (BLC)
When set ON, this option improves the camera response to strong, unwanted lighting effects
behind the required subject.
Low light sensitivity (AGC-EX)
When set to EX sensitivity in low light is increased.
Focus & field of view adjustment
Twist the levers on the side of the varifocal camera to adjust the focus and field of view settings.
TIP: If necessary, perform the final focus through the dome cover, holding it to the lens reversed
to confirm the final results.
Vertical phase adjustment
Use this adjustment when using an AC supply to align the camera phase with that of the supply.
Iris adjustment
This is factory set and should not normally require adjustment except to compensate for
excessive image blooming.
ADCDW camera specifications
Image Picture Element Pixim Orca Sensor
Effective Picture Element
720(H) x 540(V)
Resolution (TV lines) 540
Minimum Illumination 0.95 Lux @ F1.2 (AGC Boost)
S/N Ratio >42dB
Wide Dynamic Range 120 dB / 17bit
Wide Dynamic Range Area
1 Zone - Fully Adjustable
Slow Shutter Default 2x, max 32x
Electronic Shutter 1/50 or 1/60 ~ 1/100000
Day/Night Night Saver Auto/On/Off
White Balance ATW, MWB, 1-Touch
Auto White Balance Range
2200 o K ~ 7500 o K, 2000
Sync System Internal/Line lock
57Hz - 62.4Hz for NTSC
47.5Hz - 52Hz for PAL
Video Output 1.0Vpp, 75 ohm Unbalanced
Power Range
AC: 24VAC ±20% or DC: 12VDC -10% +12%
Power Consumption 3W (Max)
Operating Temperature -30 o C to +50
Storage Temperature -35 C to +60
o
Lens specifications (for all camera models)
Focal Length 2.5~6.0mm 3.8~9.5mm
F-No. F1.3 F1.2
Iris Range F1.3~F360 F1.2~F360
Minimum Object Distance 0.15mm (6") 0.15mm (6")
Field Of View Diagonal
136.6º~59.4º 96.8º~37.4º
Horizontal 108.2º~47.6º 74.2º~30.0º
Vertical 80.4º~35.6º 54.0º~22.4º
Lens Type
Aspherical Aspherical
IR Corrective Coating Yes Yes
A1: Focus adjuster
A2: Field of view adjuster
B1: Focus adjuster
B2: Field of view adjuster
B3: DIP switches
B4: ALC adjustment
B5: V-PHASE adjustment
E
H A S
V - P
A L C
+
–
H
O N
L
X B5
B .E
A W
V R
L L
N .S
B O N
A W
IN T O N
F L E X
B L C
A G C
B3
o K ~ 11000 o K
o C
C
o
9~22mm
F1.8
F1.8~F360
0.2mm (8")
39.0º~17.6º
30.7º~14.1º
22.7º~10.6º
Spherical
No