Specifications - Makita AN610H Instruction Manual

ENGLISH (Original instructions)
3-1. Adjuster
3-2. Shallow
3-3. Deep
4-1. Too deep
4-2. Flush
4-3. Too shallow
5-1. Hook
6-1. Hole
6-2. Protrusion
6-3. Nose adapter
7-1. Magazine cap
7-2. Latch lever
7-3. Door
8-1. Adjustfit
8-2. Change plate

SPECIFICATIONS

Min. hose diameter
Pneumatic tool oil
Dimensions (L X H X W)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Wear safety glasses.
･
Do not use on scaffoldings, ladders.
Intended use
The tool is intended for the preliminary interior work
such as fixing floor joists or common rafters and framing
work in 2 "x 4" housing.
Explanation of general view
8-3. Arrow
9-1. Door
9-2. Nail guide
9-3. Feeder
10-1. Trigger
10-2. Contact element
11-1. Trigger
11-2. Contact element
12-1. Change lever
12-2. Trigger
13-1. Change lever
13-2. Trigger
14-1. 0.7 mm or less thick for a steel
plate
14-2. Thickness of workpiece
Model
Air pressure
Nail length
Nail capacity
Net weight
Sheet-collated coil nail 32 mm - 65 mm
Wire-collated coil nail 250 pcs., 300 pcs., 400 pcs.
END106-3
Noise
The typical
according to EN792:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
ENE059-1
Vibration
The vibration total value determined according to
EN792:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
4
14-3. 10 mm or more
14-4. C-shaped steel
(Thickness 1.6 mm - 2.3 mm)
15-1. Nail driven to a proper depth
15-2. Nail driven too deep will cause
deformation of workpieces
16-1. Nail length
16-2. Wood thickness
16-3. Concrete range 10-15 mm
18-1. Small rod
19-1. Screwdriver
20-1. Cap
21-1. Drain cock
AN610H
0.98 - 2.26 MPa (9.8 - 22.6 bar)
Wire-collated coil nail 32 mm - 65 mm
Sheet-collated coil nail 200 pcs.
5.0 mm
ISO VG32 or equivalent
282 mm X 277 mm X 136 mm
1.9 kg
A-weighted noise
) : 86 dB (A)
pA
) : 99 dB (A)
WA
Wear ear protection
) : 3.0 m/s
h
2
ENG905-1
level determined
ENG904-2
2
ENG901-1