Playback Operation; Playback - American Dynamics AD8025X Instruction Manual

P
LAYBACK OPERATION

PLAYBACK

Turn the power ON for the monitor TV.
1
Insert a tape which has been recorded on.
2
REC CHECK TIMER REC
VIDEO MODE
AUTO B/W
REMOTE
OFF REMOTE OPTION
/ EJECT
ON STANDBY
BUZZER
ON OFF
PICTURE
SOFT SHARP
Tracking Adjustment
Use the , TRACKING button to adjust when noise appears on the playback screen.
Notes:
When restart record is selected, and a power failure occurs, the VTR will automatically go into record mode when power is
restored.
When the PAUSE button is pressed during playback, the VTR will go into still mode. To return to playback, press the PAUSE or
PLAY button. If the VTR is in still mode for longer 10 minutes the VTR will automatically resume normal playback.
Reverse playback is released after 1 minute and the VTR returns to normal playback.
The time mode cannot be changed during reverse playback (only in A3-hour mode and A18-hour mode).
When playing back a tape that has been recorded in the A12, A18 and A24 hour modes, pay attention to the following points.
• The picture may be somewhat horizontally unstable however, this is not a malfunction of the VTR.
• The upper section of the picture on the monitor screen may be distorted. This is not an abnormality.
When playing back tapes recorded in various time modes, the picture may be slightly unstable depending on the time mode.
Recording time mode
A3, A12, A24 hours
A18 hours
The picture may be vertically unstable during playback in the A12, A18 and A24 hour modes. This is not an abnormality.
When returning to normal playback after picture search, the picture may wobble for a short while.
35
1 2 3
TIME LAPSE VIDEO
4Head 24Hour
TAPE REMAIN DISPLAY
COUNTER
MEMORY ALARM RESET
TRACKING
Time mode for playback
A3, A12, A24 hours
A6, A18 hours
Press the PLAY button.
3
PLAY
Select the playback time mode.
4
P
PLAY
TIME MODE
– +
SET TIME MODE
TRACKING
SHIFT –
LOCATION SELECT
SET
Press either
clearer picture is obtained.
When returning the tracking to a standard adjustment
value, press
STOP
PLAY
+
or TRACKING button so that a
and buttons simultaneously.
H
SP